The detection and tracking of mine-water pollution from abandoned mines using electrical tomography

Ogilvy, R.D.; Kuras, O.; Palumbo-Roe, B.; Meldrum, P.I.; Wilkinson, P.B.; Chambers, J.E.; Klinck, B.A.. 2009 The detection and tracking of mine-water pollution from abandoned mines using electrical tomography. In: International Mine Water Conference, Pretoria, South Africa, 19-23 Oct 2009. (Unpublished)

Before downloading, please read NORA policies.

Preview

Text
ALERT_IMWC_2009.pdf
Download (928kB) | Preview

Official URL: http://www.wisa.org.za/minewater2009.htm

Abstract/Summary

Increasing emphasis is being placed on the environmental and societal impact of mining, particularly in the EU, where the environmental impacts of abandoned mine sites (spoil heaps and tailings) are now subject to the legally binding Water Framework and Mine Waste Directives. Traditional sampling to monitor the impact of mining on surface waters and groundwater is laborious, expensive and often unrepresentative. In particular, sparse and infrequent borehole sampling may fail to capture the dynamic behaviour associated with important events such as flash flooding, mine-water break-out, and subsurface acid mine drainage. Current monitoring practice is therefore failing to provide the information needed to assess the socio-economic and environmental impact of mining on vulnerable eco-systems, or to give adequate early warning to allow preventative maintenance or containment. BGS has developed a tomographic imaging system known as ALERT ( Automated time-Lapse Electrical Resistivity Tomography) which allows the near real-time measurement of geoelectric properties "on demand", thereby giving early warning of potential threats to vulnerable water systems. Permanent in-situ geoelectric measurements are used to provide surrogate indicators of hydrochemical and hydrogeological properties. The ALERT survey concept uses electrode arrays, permanently buried in shallow trenches at the surface but these arrays could equally be deployed in mine entries or shafts or underground workings. This sensor network is then interrogated from the office by wireless telemetry (e.g: GSM, low-power radio, internet, and satellite) to provide volumetric images of the subsurface at regular intervals. Once installed, no manual intervention is required; data is transmitted automatically according to a pre-programmed schedule and for specific survey parameters, both of which may be varied remotely as conditions change (i.e: an adaptive sampling approach). The entire process from data capture to visualisation on the web-portal is seamless, with no manual intervention. Examples are given where ALERT has been installed and used to remotely monitor (i) seawater intrusion in a coastal aquifer (ii) domestic landfills and contaminated land and (iii) vulnerable earth embankments. The full potential of the ALERT concept for monitoring mine-waste has yet to be demonstrated. However we have used manual electrical tomography surveys to characterise mine-waste pollution at an abandoned metalliferous mine in the Central Wales orefield in the UK. Hydrogeochemical sampling confirms that electrical tomography can provide a reliable surrogate for the mapping and long-term monitoring of mine-water pollution.

Item Type:	Publication - Conference Item (Paper)
Programmes:	BGS Programmes 2009 > Spatial Geoscience Technologies
Date made live:	16 Feb 2010 13:50 +0 (UTC)
URI:	https://nora.nerc.ac.uk/id/eprint/9313

Item Type:

Publication - Conference Item (Paper)

Programmes:

BGS Programmes 2009 > Spatial Geoscience Technologies

Date made live:

16 Feb 2010 13:50 +0 (UTC)

URI:

https://nora.nerc.ac.uk/id/eprint/9313