Location Dictates Snow Aerodynamic Roughness

Fassnacht, S.R.; Suzuki, K.; Nemoto, M.; Sanow, J.E.; Kosugi, K.; Tedesche, M.E.; Frey, M. ORCID: https://orcid.org/0000-0003-0535-0416. 2024 Location Dictates Snow Aerodynamic Roughness. Glacies, 1 (1). 16, pp. 10.3390/glacies1010001

Before downloading, please read NORA policies.

Preview

Text (Open Access)
Copyright: © 2024 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https:// creativecommons.org/licenses/by/ 4.0/).
glacies-01-00001.pdf - Published Version
Available under License Creative Commons Attribution 4.0.
Download (4MB) | Preview

Official URL: https://www.mdpi.com/2813-8740/1/1/1

Abstract/Summary

We conducted an experiment comparing wind speeds and aerodynamic roughness length (z0) values over three snow surface conditions, including a flat smooth surface, a wavy smooth surface, and a wavy surface with fresh snow added, using the wind simulation tunnel at the Shinjo Cryospheric Laboratory in Shinjo, Japan. The results indicate that the measurement location impacts the computed z0 values up to a certain measurement height. When we created small (4 cm high) snow bedforms as waves with a 50 cm period, the computed z0 values varied by up to 35% based on the horizontal sampling location over the wave (furrow versus trough). These computed z0 values for the smooth snow waves were not significantly different than those for the smooth flat snow surface. Fresh snow was then blown over the snow waves. Here, for three of four horizontal sampling locations, the computed z0 values were significantly different over the fresh snow-covered waves as compared to those over the smooth snow waves. Since meteorological stations are usually established over flat land surfaces, a smooth snow surface texture may seem to be an appropriate assumption when calculating z0, but the snowpack surface can vary substantially in space and time. Therefore, the nature of the snow surface geometry should be considered variable when estimating a z0 value, especially for modeling purposes.

Item Type:	Publication - Article
Digital Object Identifier (DOI):	10.3390/glacies1010001
ISSN:	2813-8740
Additional Keywords:	anemometric measurements; wind speed; snow bedforms; wind-blown snow; Shinjo Cryospheric Environment Laboratory
Date made live:	02 Apr 2024 11:12 +0 (UTC)
URI:	https://nora.nerc.ac.uk/id/eprint/537206

Item Type:

Publication - Article

Digital Object Identifier (DOI):

10.3390/glacies1010001

ISSN:

2813-8740

Additional Keywords:

anemometric measurements; wind speed; snow bedforms; wind-blown snow; Shinjo Cryospheric Environment Laboratory

Date made live:

02 Apr 2024 11:12 +0 (UTC)

URI:

https://nora.nerc.ac.uk/id/eprint/537206