nerc.ac.uk

# Mathematical modelling of canola oil biodegradation and optimisation of biosurfactant production by an Antarctic bacterial consortium using response surface methodology

Zahri, K.N.M.; Khalil, K.A.; Gomez-Fuentes, C.; Zulkharnain, A.; Sabri, S.; ; Lim, S.; Ahmad, S.A.. 2021 Mathematical modelling of canola oil biodegradation and optimisation of biosurfactant production by an Antarctic bacterial consortium using response surface methodology. Foods, 10 (11), 2801. 22, pp. https://doi.org/10.3390/foods10112801

 Preview
Text (Open Access)
foods-10-02801-v4.pdf - Published Version

## Abstract/Summary

An Antarctic soil bacterial consortium (reference BS14) was confirmed to biodegrade canola oil, and kinetic studies on this biodegradation were carried out. The purpose of this study was to examine the ability of BS14 to produce biosurfactants during the biodegradation of canola oil. Secondary mathematical equations were chosen for kinetic analyses (Monod, Haldane, Teissier–Edwards, Aiba and Yano models). At the same time, biosurfactant production was confirmed through a preliminary screening test and further optimised using response surface methodology (RSM). Mathematical modelling demonstrated that the best-fitting model was the Haldane model for both waste (WCO) and pure canola oil (PCO) degradation. Kinetic parameters including the maximum degradation rate (μmax) and maximum concentration of substrate tolerated (Sm) were obtained. For WCO degradation these were 0.365 min−1 and 0.308%, respectively, while for PCO they were 0.307 min−1 and 0.591%, respectively. The results of all preliminary screenings for biosurfactants were positive. BS14 was able to produce biosurfactant concentrations of up to 13.44 and 14.06 mg/mL in the presence of WCO and PCO, respectively, after optimisation. The optimum values for each factor were determined using a three-dimensional contour plot generated in a central composite design, where a combination of 0.06% salinity, pH 7.30 and 1.55% initial substrate concentration led to the highest biosurfactant production when using WCO. Using PCO, the highest biosurfactant yield was obtained at 0.13% salinity, pH 7.30 and 1.25% initial substrate concentration. This study could help inform the development of large-scale bioremediation applications, not only for the degradation of canola oil but also of other hydrocarbons in the Antarctic by utilising the biosurfactants produced by BS14.

Item Type: Publication - Article https://doi.org/10.3390/foods10112801 2304-8158 Kinetic modelling, canola oil, degradation, biosurfactant, Antarctic bacteria, central composite design 18 Nov 2021 09:08 +0 (UTC) https://nora.nerc.ac.uk/id/eprint/530875