Characterization and quality control of stone columns using surface wave testing

Madun, A.; Jefferson, I.; Foo, K.Y.; Chapman, D.N.; Culshaw, M.G.; Atkins, P.R.. 2012 Characterization and quality control of stone columns using surface wave testing. Canadian Geotechnical Journal, 49 (12). 1357-1368. https://doi.org/10.1139/t2012-096

Before downloading, please read NORA policies.

Preview

Text
Abstract.pdf
Download (131kB) | Preview

Official URL: http://dx.doi.org/10.1139/t2012-096

Abstract/Summary

Seismic surface waves are well-suited for the study of the elastic profile of soils. This study evaluates the application of surface waves in characterizing the properties of laterally heterogeneous soil, specifically for use in the quality control of stone columns used for ground improvement. Here, laterally heterogeneous soil refers to the gravelly sand material being formed into cylindrical columns and inserted into a homogenous clay bed. A scaled-down model of typical stone columns in a clay matrix was constructed. Measurements were made on stone columns of different dimensions, as well as on a defective column, under controlled conditions so that the properties of the materials used in the model under test were within limited ranges. Shear moduli obtained from the phase velocity determined from the controlled tests showed close agreement with those measured indirectly with the vane shear test. The dispersive curve produced in this study demonstrated an increased phase velocity with increasing wavelength for the measurements on the clay (between columns), and decreased phase velocity with increasing wavelength for the measurements on the column. More interestingly, the results showed that in the characterization of lateral nonhomogeneities, the phase velocity versus wavelength relationship varies for stone columns of different diameters and densities. These results point to the potential for estimating the phase velocity and, thus, the shear modulus of an effective region that spans both the lateral and depth axes, and also demonstrate that the results can be influenced by the positioning of sensors with respect to the survey target.

Item Type:	Publication - Article
Digital Object Identifier (DOI):	https://doi.org/10.1139/t2012-096
Programmes:	BGS Programmes 2010 > BGS Corporate
ISSN:	0008-3674
Date made live:	20 Mar 2013 13:58 +0 (UTC)
URI:	https://nora.nerc.ac.uk/id/eprint/500576

Item Type:

Publication - Article

Digital Object Identifier (DOI):

https://doi.org/10.1139/t2012-096

Programmes:

BGS Programmes 2010 > BGS Corporate

ISSN:

0008-3674

Date made live:

20 Mar 2013 13:58 +0 (UTC)

URI:

https://nora.nerc.ac.uk/id/eprint/500576