nerc.ac.uk

Evaluation of hydrochars from lignin hydrous pyrolysis to produce biocokes after carbonization

Castro-Díaz, M.; Uguna, C.N.; Florentino, L.; Díaz-Faes, E.; Stevens, L.A.; Barriocanal, C.; Snape, C.E.. 2017 Evaluation of hydrochars from lignin hydrous pyrolysis to produce biocokes after carbonization. Journal of Analytical and Applied Pyrolysis, 124. 742-751. 10.1016/j.jaap.2016.11.010

Before downloading, please read NORA policies.
[img] Text
Diaz et al 2017 JAAP Journal of Analytical and Applied Pyrolysis vol 124 pg 742-751.pdf - Accepted Version
Restricted to NERC registered users only until 19 November 2017.

Download (1MB) | Request a copy

Abstract/Summary

Hydrochars were obtained after hydrous pyrolysis of a pine Kraft lignin using different reaction conditions (temperature, water content and residence time) and the residues were characterized through a wide range of analytical techniques including high-temperature rheometry, solid-state 13C nuclear magnetic resonance (NMR), thermal gravimetric analysis (TGA), diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) and field emission scanning electron microscopy (FE-SEM). The results indicated that an increase in reaction temperature, an increase in residence time or a decrease in water content reduces the amount of fluid material in the residue. The hydrous pyrolysis conditions studied were not able to increase the maturation of lignin, which would result in an increase in the resolidification temperature, but reduced the amount of mineral matter in the hydrochar produced. On the other hand, the hydrochars obtained from pristine lignin, torrefied lignin (300 °C, 1 h) and their 50:50 wt.%/wt.% blend at temperatures of 350 °C after 6 h using 30 ml of water had lower ash contents (<2 wt.%) than the parent lignin (2.5 wt.%) and a high rank good coking coal (10 wt.%). However, the reactivity of the resulting biocokes (>45%) is excessively high compared to that of the good coking coal (10%) and the micro-strength of the biocokes (R1<1%) is much lower than that of the coal (R1 = 17%). These findings could be rationalized by the high total porosity (>39%) and high microporous surface areas ( > 400 m2/g) of the biocokes and high alkalinity index of the lignins (>27%) compared to those of the coke (27% and 145 m2/g) and coal (0.6%), respectively. Furthermore, the biocoke derived from the hydrous pyrolysed torrefied lignin did not agglomerate, which could not be explained by changes in the chemical properties of the material and requires further investigation.

Item Type: Publication - Article
Digital Object Identifier (DOI): 10.1016/j.jaap.2016.11.010
ISSN: 01652370
Date made live: 04 Apr 2017 13:58 +0 (UTC)
URI: http://nora.nerc.ac.uk/id/eprint/516787

Actions (login required)

View Item View Item

Document Downloads

Downloads for past 30 days

Downloads per month over past year

More statistics for this item...