nerc.ac.uk

Development of a colorimetric microfluidic pH sensor for autonomous seawater measurements

Rérolle, Victoire M.C.; Floquet, Cedric F.A.; Harris, Andy J.K.; Mowlem, Matt C.; Bellerby, Richard R.G.J.; Achterberg, Eric P.. 2013 Development of a colorimetric microfluidic pH sensor for autonomous seawater measurements. Analytica Chimica Acta, 786. 124-131. 10.1016/j.aca.2013.05.008

Full text not available from this repository.

Abstract/Summary

High quality carbonate chemistry measurements are required in order to fully understand the dynamics of the oceanic carbonate system. Seawater pH data with good spatial and temporal coverage are particularly critical to apprehend ocean acidification phenomena and their consequences. There is a growing need for autonomous in situ instruments that measure pH on remote platforms. Our aim is to develop an accurate and precise autonomous in situ pH sensor for long term deployment on remote platforms. The widely used spectrophotometric pH technique is capable of the required high-quality measurements. We report a key step towards the miniaturization of a colorimetric pH sensor with the successful implementation of a simple microfluidic design with low reagent consumption. The system is particularly adapted to shipboard deployment: high quality data was obtained over a period of more than a month during a shipboard deployment in northwest European shelf waters, and less than 30 mL of indicator was consumed. The system featured a short term precision of 0.001 pH (n = 20) and an accuracy within the range of a certified Tris buffer (0.004 pH). The quality of the pH system measurements have been checked using various approaches: measurements of certified Tris buffer, measurement of certified seawater for DIC and TA, comparison of measured pH against calculated pH from pCO2, DIC and TA during the cruise in northwest European shelf waters. All showed that our measurements were of high quality. The measurements were made close to in situ temperature (+0.2 ̊C) in a sampling chamber which had a continuous flow of the ship’s underway seawater supply. The optical set up was robust and relatively small due to the use of an USB mini-spectrometer, a custom made polymeric flow cell and an LED light source. The use of a three wavelength LED with detection that integrated power across the whole of each LED output spectrum indicated that low wavelength resolution detectors can be used instead of the current USB mini spectrophotometer. Artefacts due to the polychromatic light source and inhomogeneity in the absorption cell are shown to have a negligible impact on the data quality. The next step in the miniaturization of the sensor will be the incorporation of a photodiode as detector to replace the spectrophotometer.

Item Type: Publication - Article
Digital Object Identifier (DOI): 10.1016/j.aca.2013.05.008
ISSN: 00032670
Additional Keywords: pH; Colorimetry; Sensor development; Microfluidic pH sensor; LED; Autonomous
Date made live: 28 Jun 2013 09:22 +0 (UTC)
URI: http://nora.nerc.ac.uk/id/eprint/502418

Actions (login required)

View Item View Item

Document Downloads

Downloads for past 30 days

Downloads per month over past year

More statistics for this item...